Environmentally Wear-resistant Melamine Coating SPC Flooring
Basic Info
Model No.: MJVMC-SPC-002
Product Description
Environmentally Wear-resistant Melamine Coating SPC Flooring
Product Description
Jiamei wear-resistant melamine coating SPC flooring is a kind of brand-new green environmental protection plank.This flooring has the characteristic of natural fiber and plastic at the same time, excellent water resistance, water absorption only a few thousandths of wood, wear resistance is 3-10 times higher than wood, steel and bearing capacity is greater than whole plastic material,but the thermal expansion and contraction are smaller than steel and all plastic materials.processability is better than wood, steel, plastic and other materials, the later maintenance cost is small. Jiamei wear-resistant melamine coating SPC flooring adopts the special grinding process to increase the friction force and avoid slippage.Fire resistant material, eliminate fire hazard, effectively reduce the risk of accidents.
Jiamei wear-resistant melamine coating SPC flooring has been used environmentally friendly formula materials, do not contain heavy metals, phthalates and other harmful substances.
Jiamei wear-resistant melamine coating SPC flooring has obtained Belgium UNILIN click patent, SGS EU standard test.
The above physical properties and chemical indexes have passed SGS performance test and CE certification test.
Application Area
Spc Flooring is a revolutionary progress of floor materials, which has become the most suitable floor materials for residential use. Jiamei SPC floor integrates the advantages of wood floor and ceramic tile - warmth, comfort, waterproof, wear-resistant, long life and easy installation. It can be laid in the areas where traditional wood floor is laid, such as bedrooms, living rooms, etc., and in the areas where traditional wood floor cannot be paved, such as kitchens, balconies, washrooms. It is a new type of Wood Spc Flooring that can be paved in the whole house.
Manufacturing Structure
Main quality data of Jiamei SPC high-end floor
≤400mm Scope≤0.25mm ≥400mm Scope≤0.35mm
NO. Items Standards 1
thickness tolerance
0.05mm 2 density
1.9~2.1g/cm³ 3 Shrinkage rate
≤0.1%（80℃ 6H）
4 warping
≤0.5mm/m
5 Perpendicularity straightness
6 Non-slip index
≥0.30mm
7 Lock clearance
≤0.10mm
8 Lock pull force
Normal temperature 23℃
5mm＞13-15kgs/5cm
4.2mm＞12kgs/5cm
＞15-18kgs/5cm
（V-lock for short side）
9 Light fastness
≥6
10 Thermal conductivity
0.25W/(m·℃)
11 Stripping force
≥50N/cm²
Product Performance
First: Common Quality
Scratch resistance: scratch with the end face of the coin, leaving no trace.
Stain resistance: marker pen is easy to wipe without mark
Burn resistant: ignite a cigarette and place it for 3 minutes. There is no trace on the surface.
On the basis of the first one, a kind of reinforced wear-resistant floor is introduced, which can bear the rolling and scalding of cigarettes, and has stronger wear-resistant force for the sand of sole and floor scraping.
Third: Antibacterial Quality
In the case of all kinds of properties, the antibacterial coating is added. It can inhibit E. coli, Staphylococcus aureus and other common bacteria, and effectively isolate the growth of bacteria. It is suitable for kindergartens, nursing homes, schools, families and other public occasions. Installation Method
1. Put the convex of Plate B tilt into the groove of plate A, lock and lay flat;
2. After leveling, the spacing between plate B and plate C is about 2-3mm, forming a parallel line;
3. Lift up the Plates A and B at the same time (with the ground at a 45 degree angle;
4. Push plate B towards plate C until it is tight;
5. Flatten plate A and plate B with the palm of hands. But do not press too hard against the floor;
6. After assembly, the floor will be flat and seamless. If the floor is uneven or has gaps, gently lift at a 10-30 degree angle and lock it. After locking, the floor will be automatically leveled.
Product Concept
Dalian Jiamei New Materials Co., Ltd. is a high-tech enterprise mainly engaged in research and development, production and sales of wood / stone plastic materials and products. The company has synchronous production technology with international level, good product development ability, mature business concept, good cooperation reputation, advanced management and technical services.
The company always adheres to the business philosophy of "people-oriented, moral first, to create a healthy living environment", takes "building a beautiful, green and harmonious living environment" as the unified vision and mission, practices the development concept of "innovation, coordination, green, opening and sharing" put forward by the state, creates a beautiful space of "pollution-free", and returns a healthy living environment for human beings.
Product Categories : Melamine Coating SPC Flooring > Wear Resistant Melamine Coating SPC Flooring